Priming evercare® inLine, Gravity Set Vented Filterstop

In these recommendations you will find guidance on how to prime evercare® inLine Gravity Set Vented Filterstop when using semirigid container or infusion bag.

Step 1

Unwrap the IV-set and check whether the air vent cap is closed and the roller clamp is open.

Step 2

Change position of the roller clamp and control that the tubing is unaffected and close it.

Step 3

Spike the semirigid container/bag. Invert the container/bag and hang it from the IV pole or similar.

Step 4

Attach the tubing to the tube holder at the roller clamp.

Step 5

Squeeze gently the drip chamber 3-5 times to fill half of the drip chamber. (Too aggressive squeeze can lead to mixed air fluid below the drip chamber).

Step 6

Open the roller clamp until the complete tubing is primed.

Step 7

Closed the roller camp.

Additional information

Here you can find related products and PDF for download.

Products

REF: 10590, 10591.

Download PDF

! See the package for complete IFU instructions for use, this is only a guide for users !

DO NOT OVER-TIGHTEN connections. DO NOT USE any instruments to tighten connections

Tip: Glass and non fully collapsible containers: Keep the vent closed during spiking and priming. Only open the vent flap when venting is required.