- Wash your hands before donning the gloves.
- Don’t use the gloves with long sharp fingernails or rings.
- If your hands get contaminated during doffing, wash your hands, or use an alcohol-based hand sanitizer.
How to use SELEFA® SENSE LIGHT medical examination gloves
Opening the dispenser box
Step 1
Turn the dispenser box upside down and press down the opening at the perforated cut.
Step 2
Grab the loose opening part with your thumb and index finger and remove the loose part.
Step 3
In the opening, make sure the cuff comes out first.
Step 4
Place the dispenser box in holder with opening facing down. Grab the gloves only by the cuff.
Donning
Step 1
Before donning, ensure the gloves are free from pinholes or tears. Insert your hand in the glove…
Step 2
… and pull the glove firmly so that it fits comfortably.
Step 3
Check that the gloves fit well.
Doffing
Step 1
Grasp the outside of the cuff of the glove without touching the skin to avoid contamination.
Step 2
Peel off, holding the glove in the gloved hand. Allow the glove to turn inside out.
Step 3
Place the removed glove in your gloved hand. Slide your fingers of the ungloved hand under the remaining glove at the cuff…
Step 4
…and peel off the second glove over the first glove.
Step 5
Discard the gloves.




