Medical face mask with tie-bands

In these recommendations you will find guidance on how to correctly don on and doff medical face masks with tie-bands.

Step 1

Ensure your hands are thoroughly cleaned.

Step 2

Place the mask on your face and make sure to cover your nose and mouth.

Step 3

Tie the upper tie-bands at the crown of your head. Tie the top tie-bands of the mask before tying the bottom tie-bands.

Step 4

Press the nose wire and unfold the mask carefully to ensure that it fits your nose and cheeks.

Step 5

Change the facemask when contaminated and as often as your local recommendations.

Step 6

Remove the mask carefully. Do not touch the front of the mask which may be contaminated. Untie the bottom tie-bands first and then the upper tie-bands carefully. You should be able to remove it without the mask landing on your clothing/skin, hence less likelihood of further contamination.

Step 7

Dispose the mask by holding the tie-bands.

Additional information

Here you can find related products and PDF for download.

Products

REF: 2884, 2885

Download PDF

Please note!

See the package for complete IFU instructions for use, this is only a guide for users

DO NOT OVER-TIGHTEN connections. DO NOT USE any instruments to tighten connections

Tip: Glass and non fully collapsible containers: Keep the vent closed during spiking and priming. Only open the vent flap when venting is required.